Grote boosdoener bij de opname van geluid is heel vaak de wind. Daarom verkoopt Art & Craft windkapjes in alle vormen en kleuren. Daarnaast vind je bij ons ook shockmounts, sticky pads om dasspeld microfoons te bevestigen en nog veel meer.
Rode VideoMic Rode is inmiddels uitgegroeid tot een van de belangrijkste producent en leverancier van microfoons. De microfoons worden in Australie in de eigen Rode fabriek ontworpen en geproduceerd. Moderne productie methoden zorgen er voor dat de de microfoons aan zeer hoge kwaliteitsnorm voldoen en de productiekosten toch laag blijven. Daardoor zijn Rode microfoons interressant geprijsd en kwalitatief vergelijkbaar met veel duurdere microfoons in de markt.
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
The WS7 is a high-performance windshield for the RØDE NTG3 and other compatible shotgunmicrophones. Designed for use in windy recording environments, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. High-performance windshield for RØDE NTG3 Compatible with any shotgun microphone with a maximum slot length of 186mm and a diameter of 19-20mm Suitable for the NTG3 shotgun microphone Acoustically transparent synthetic fur Easy to fit and remove
The WS6 is a high-performance windshield for shotgun microphones. Designed for use in windy recording environments, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone with a maximum slot length of 160.5mm and a diameter of 21-22.5mm. High-performance windshield for RØDE shotgun microphones Compatible with any shotgun microphone with a maximum slot length of 160mm and a diameter of 21-22.5mm Suitable for NTG1, NTG2, NTG4 and NTG4+ shotgun microphones Acoustically transparent synthetic fur Easy to fit and remove
The WS4 is a high-quality foam windshield that is designed to fit the RØDE NT4 stereo microphone. It helps prevent wind noise and any hard plosive sounds overloading the microphone capsule. High-quality foam windshield for RØDE NT4
The WS12 is a professional-grade windshield for the RØDE VideoMic GO II microphone. Featuring open cell foam covered by synthetic fur, it is designed to minimise wind noise and plosives when recording. Includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone. High-performance windshield for RØDE VideoMic GO II For use in high-wind conditions Acoustically transparent synthetic fur Easy to fit and remove
The WS11 is an easy-to-use high-performance windshield for the VideoMic NTG. Designed to for use in windy recording environments, the WS11 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber grip system prevents any wind noise from entering the rear of the microphone pickup area.
The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME. High-quality foam windshield for RØDE lavalier microphones Reduces wind noise and plosives Supplied in a pack of three
The WS-HS1 is a high-quality foam windshield that is designed to fit the HS1 and HS2 headset microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-HS1 is supplied in a pack of three, and is available in black or pink. High-quality foam windshield for RØDE headset microphones Reduces wind noise and plosives Available in black and pink Supplied in a pack of three Compatible with both HS1 and HS2 headsets
The Tripod is a collapsible mini tripod designed for mounting lightweight microphones, cameras or accessories that support either 1/4-inch or 3/8-inch mounting. It provides 360-degree rotation and a wide angle of vertical adjustment. The tripod stand is fitted with a 1/4-inch thread and ships with a 3/8-inch thread adaptor for use with most standard mic clips. Collapsible mini tripod for mounting microphones and other devices 1/4-inch thread, supplied with a 3/8-inch thread adaptor
The SM4-R is a suspension shock mount for mounting RØDE shotgun and small-diaphragm studio microphones onto a stand or boompole with 3/8-inch or ⅝-inch thread. The SM4-R is equipped with dual Rycote® Lyre® mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and an integrated cable management clip. Premium shock mount for shotgun and small-diaphragm condenser microphones Includes angle adjustment
The SM5 is a suspension shock mount with ring clamp adaptor that allows RØDE shotgun microphones to be used with professional video cameras. It supports camera clamp mounts that effectively grip a 24 or 27mm barrel. Most cameras feature rubber pads inside the ring clamp to allow for some tolerance in barrel size. The design of the suspension shock mount means the microphone is physically isolated from the stand, ensuring that there is no unwanted rumble or vibrations in your recording. 1/4-inch and 3/8-inch threads at the base of the mount allow for easy attachment to a boompole or other accessories. Premium shock mount for camera-mounted shotgun microphones Can also be mounted on a boompole or microphone stand
Designed specifically for end-address broadcast microphones such as the Procaster or Podcaster, the PSM1 provides isolation from external vibrations that may cause unwanted rumble and vibrations. It also helps to isolate the microphone from noise associated with repositioning the microphone whilst in use. Studio-grade microphone suspension shock mount Compatible with RØDE broadcast-style microphones including the Podcaster and Procaster
The PG2-R Pro Cable is an XLR cable with a strain-relief junction box that is designed for use with the PG2-R Pistol Grip and SM series shock mounts. It features professional-quality Neutrik® and Switchcraft® connectors. Professional XLR cable with strain-relief junction box Neutrik® and Switchcraft® connectors
The PG2-R is a professional-grade pistol grip designed for using shotgun microphones and other compatible microphones in handheld applications. It features dual Rycote® Lyre® mounts to ensure maximum isolation from handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and an integrated cable management clip.The PG2-R is lightweight and extremely comfortable. The grip houses multiple cable mounting points, with a dedicated space for the PG2-R Pro Cable to terminate flush with the base for easy connection to an XLR cable. It also features a heavy-duty locking nut for adjusting the angle of the microphone and a 3/8-inch thread on the base for attaching the grip to boompoles and microphone stands. Professional-grade pistol grip for shotgun microphones Dual Rycote® Lyre® mounts for maximum isolation from handling noise Lightweight and extremely comfortable Easy connectivity with XLR cables using PG2-R Pro Cable
Rode PG-1 - Cold Shoe Pistol Grip De PG1 cold shoe pistol grip is een handige en ergonomische manier op uw RØDE VideoMic of Stereo VideoMic te gebruiken los van uw camera. Een handige 3/8 schroefdraad aan de basis zorgt voor een makkelijke verbinding met een boompole of microfoon standaard. Uitgerust met kabelmanagement. Klik hier voor meer informatie O.a. geschikt voor - Rode Stereo Video Microfoon- Rode Video Microfoon
MINIFUR-LAVDeluxe Lavalier WindshieldThe MINIFUR-LAV is an artificial fur windshield that is designed to fit the RØDE Lavalier, Lavalier GO and RØDELink LAV microphones. It signifcantly reduces wind noise when using a lavalier microphone windy conditions. The MINIFUR-LAV is supplied as a pack of three. High-performance windshield for RØDE headset microphones For use in high-wind conditions Supplied in a pack of three
The Mini Boompole is a high-quality professional boompole that is compact and lightweight, making it highly convenient for location recording. The Mini Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It weighs just 580 grams and has a reach of 2 metres. Lightweight aluminium construction 2m (6.5') reach Ultra-smooth extension and retraction system Easy-to-use lock/release mechanism
Trustpilot
