Ansmann ALCT6-24/10

€ 83,40
Voor 13.00 u. besteld,
morgen in huis
  • Mariakerke Niet op voorraad
  • Sint-Denijs-Westrem Niet op voorraad
  • Online voorraad Voor 13.00 u. besteld,
    morgen in huis
  • Mariakerke Niet op voorraad
  • Sint-Denijs-Westrem Niet op voorraad
  • Online voorraad Voor 13.00 u. besteld,
    morgen in huis
14 dagen de tijd om te retourneren

Niet tevreden met je aankoop? Gelukkig kan je meestal je artikel retourneren. Dit is wel enkel mogelijk binnen de 14 dagen na ontvangst van je product. We rekenen er op dat we je artikel terug in dezelfde, ongebruikte staat ontvangen.

Ontdek meer
Veilig kopen met BeCommerce

Art & Craft is gecertificeerd met het BeCommerce kwaliteitslabel. Dit wil zeggen dat wij gecontroleerd zijn door de onafhankelijke organisatie, Bureau Veritas Certification Belgium NV.

Groot assortiment & 2 showrooms

Groot assortiment & 2 showrooms

Ontdek meer

Info

The ALCT 6-24/10 is a fully automatic charger suitable for maintenance-free lead acid and lead gel batteries of output voltage 6, 12 or 24 V. After connecting the pole terminals the device automatically detects the output voltage of the connected lead acid battery and gives a corresponding LED indication on the display. If the battery is completely discharged, the charger automatically switches to REFRESH mode and charges the battery by pulse charging until a sufficient voltage has been reached and the normal charging process can be started.

Depending on the voltage a charging current of 1, 5 or 10 amps can be chosen, so car batteries can be charged very quickly and smaller motorcycle batteries can be charged safely. Without a manual adjustment the ALCT 6-24/10 will charge with the default charging current of 1 amp. At low temperatures below 5°C a COLD TEMPERATURE mode (optional) ensures that the lead acid battery will be fully charged to 100% despite the weather conditions. A clear display provides reliable information about the different settings as well as the current charge state of the battery (35-70-100%). In case of a defective battery the “FAULT” LED is lit and charging stops.

The charging process is optimized according to special charging technology developed in house. Once the battery is fully charged the charger automatically switches over to trickle charge, to ensure the battery is not overcharged. Motorcycle, motor boat and lawn mower batteries can be left connected for an extended period (e.g. during winter time) to ensure that they are always ready for use whenever they are needed. Designed for continuous battery power supply the ALCT 6-24/10 can be left connected to the battery without interruption and keeps the battery fully charged, even if the battery is loaded/discharged at the same time. This means that the battery is always available at full capacity.

If the battery will still not start the vehicle, the ALCT 6-24/10 has built-in automatic starting aid support. When connected to the mains supply and the battery, the charger detects an attempt to start the engine and automatically provides the highest current available. For maximum safety the lead acid charger is equipped with electronic protection against short-circuit and reverse polarity. Thanks to its numerous features the ALCT 6-24/10 ensures safe, gentle and consistent charging providing optimum performance and long battery life.

Kenmerken

Energie
  • Spanning 24 V
  • Output current 10 A
Technische details
  • Aantal 1 stuk(s)
Gewicht en omvang
  • Breedte 270 mm
  • Diepte 140 mm
  • Hoogte 192 mm
  • Gewicht 1416 g
Design
  • Kleur Zwart
Prestatie
  • Ondersteund aantal accu's/batterijen 1
  • Compatibele batterij technologiën Sealed Lead Acid
  • Stroomspanning bescherming Kortsluiting
Bekijk alle kenmerken Bekijk minder kenmerken

Reviews

Dit product is nog niet beoordeeld! Wees de eerste en maak kans op een waardebon van € 100 voeg een review toe
Ansmann ALCT6-24/10

Ansmann ALCT6-24/10

€ 83,40
Voor 13.00 u. besteld,
morgen in huis