Grote boosdoener bij de opname van geluid is heel vaak de wind. Daarom verkoopt Art & Craft windkapjes in alle vormen en kleuren. Daarnaast vind je bij ons ook shockmounts, sticky pads om dasspeld microfoons te bevestigen en nog veel meer.
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-7 is designed to connect to Lectrosonics SM Series, UMa Series, LMa Series and UM450 transmitters. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc. MiCon connector for select Lectrosonics wireless devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-6 is designed to connect to AKG PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000 transmitters, as well as the Audix RAD-360. AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners. MiCon connector for select AKG and Audix wireless devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-2 is designed to connect to a standard 3.5mm stereo mini-jack, with a power supply of 1V minimum. MiCon connector for a standard 3.5mm stereo mini-jack
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-11 is designed to connect to TRRS devices such as iOS and Android mobile devices. MiCon connector for TRRS devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics. MiCon connector for select MIPRO wireless devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon 3-metre cable is shielded and reinforced with heavy-duty Kevlar. Cable for use with the MiCon connector system 3m (10') or 1.2m long Black (also comes in pink)
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
De Røde Invisilav is ontworpen om lavalier microfoons subtiel te kunnen verbergen. De zachte constructie absorbeert bijgeluiden en vibraties, terwijl het wijde en platte profiel zich van de externe elementen ontdoet en zorgt voor een zeer veelzijdige toepassing. De Invisilav wordt geleverd met bevestigingsmateriaal, dat zich eenvoudig hecht aan zowel stof als huid. Daarnaast zijn ze gemaakt van medisch huidvriendelijk materiaal, waardoor deze bij iedereen irritatie vrij is toe te passen.
The DeadCat VMPR is a high-performance windshield for the RØDE VideoMic Pro. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro Acoustically transparent synthetic fur
The DeadCat VMP+ is a high-performance windshield for the RØDE VideoMic Pro+. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro+ Acoustically transparent synthetic fur
The DeadCat GO is a high-performance windshield for the RØDE VideoMic GO. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic GO Acoustically transparent synthetic fur
The DeadCat is a high-performance windshield for the RØDE VideoMic. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Acoustically transparent synthetic fur
The CLIP1 is a cable management clip that is designed to allow optimal mounting of RØDE MiCon cables. Supplied in a pack of three. Cable management clip for MiCon cables Pack of three
The Boompole Clips are designed to quickly and easily mount onto any compatible RØDE boompole to secure the microphone lead and minimise any movement. Supplied in a pack of 5. Clip for securing cables to boompoles Supplied in a pack or 5
The Boompole Bag is a high-quality neoprene carry bag designed to accommodate a boompole with shock mount and microphone attached for easy transport. High-quality neoprene carry bag Accommodates a boompole, shock mount and microphone
The Boompole is a precision-balanced professional boompole for location recording. Machined from high-grade, lightweight aluminium, the Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It has a reach of 3.3 metres and weighs 980 grams. Lightweight professional boompole 3m (10') reach Ultra-smooth extension and retraction system Easy-to-use locking mechanism
The Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system. It allows for easy mounting of the Blimp onto a boompole, stand or any other mounting device with a 3/8-inch thread. Universal lightweight mounting adaptor for RØDE Blimp Allows for easy mounting of the Blimp onto any boompole, boom stand or any other mounting device
The Blimp is the ultimate windshield and shock mounting system for RØDE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone. The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included. Complete windshield and shock mount system for shotgun microphones Rycote® Lyre® suspension system for superior isolation from handling noise Ultra-lightweight design Attaches to any standard boompole 10-year warranty (no registration required)
Trustpilot
